Motor Basics

What is DC motor Torque?

Are you considering Torque when selecting DC motors? If so, we are right here to provide you with all the help and give you some advice before investing. A DC motor is powered through a direct Current, meaning the Current flows in one direction only. When we select to use

Read More »
Maintenance of EDM

What is EDM?

When traditional machining methods reach their limit, electric discharge machining can be the answer. The EDM process allows for high accuracy and is applicable for any conductive material.   Brief introduction of EDM Electrical discharge machining, or EDM, is a non-traditional method in which material is removed from a workpiece

Read More »
DC Motor

What is a DC motor?

When it comes to DC motor, no one knows it better than Kinmore motor, who always strives to develop, design, and manufacture micro precision DC motors. Here is a detailed introduction to what is DC motor.   Definition of a DC motor   A direct Current (DC) motor is a

Read More »
Brushless DC Motor

What is a Brushless DC motor?

Brushless DC motors are widely used in industrial applications across the world. At the most basic level, there are not only brushed or brushless motors but also DC and AC motors. Brushless DC motors, as you may imagine, do not contain brushes and use a DC.   These motors provide

Read More »
The structure of the DC motor

DC motor,how does it work?

Although we have learned what the DC motor is in the previous article, what we know about DC Motor is just the tip of the iceberg. Today, follow me to explore the structure of a DC motor and the working principle of it.   The structure of the DC motor The DC

Read More »
varistor in micro motor

Application of varistor in micro motor

A “varistor” is a resistance device with non-linear volt-ampere characteristics. It is mainly used for Voltage clamping when the circuit is subjected to overVoltage and absorbs excess Current to protect sensitive devices. The varistor is a Voltage-limiting protection device. Using the non-linear characteristics of the varistor, when an overVoltage occurs

Read More »
DC Motors

Motor Quality Directly Impacts Final Product Quality

Many industries depend on DC Motors. In the decades before the DC Motor refined, their use was limited. Today many different applications are heavily dependent on these motors within a multitude of industries. Because its quality has a direct impact on the end product, it is essential to work with

Read More »
gear motor

How to select the suitable gear motor

A gear motor is an all-in-one combination of an electric motor and a gearbox. That makes it a simple, cost-effective solution for high-Torque, low-Speed applications because it combines an electric motor with a gear reducer system. Most importantly, gear motors ensure a well-matched electric motor and gearhead, helping to achieve

Read More »
DC motor

How to reduce the noise of DC motor?

The noise of different mechanical equipment may be large or small, but they should all have a normal scale specification value. When the specification value is exceeded, the equipment is likely to show a malfunction. What should we do if the DC motor is too noisy?   Motors are one

Read More »
Brushless DC motor work

How does a Brushless DC motor work

1. Brushless DC Motor Principles Brushless DC motors use permanent magnets similar to motors, but are constructed “from back to front.” Magnets are fixed to the rotor, and the stator is wound around a specified number of poles. By using an electronic commutator, the Current is reversed around the stator

Read More »

Categories

  • Solutions
  • Automotive Parts
  • Home Appliance
  • Personal Care
  • Industrial Tools
  • Commercial Products
  • Valves and Meters
  • Security and Locks
  • Health Care Devices
  • Articles
  • Motor Basics
  • Company News
  • Industry Information