Read the latest blogs of Kinmore.
The brushless DC (BLDC) motor’s increasing popularity is due to the use of electronic commutation. That replaces the conventional mechanics comprised of brushes rubbing on the commutator to energize the windings in the armature of a DC motor. Electronic commutation
The definition of the armature In electrical engineering, an armature is the component of an electric motor which carries alternating current. The armature windings conduct AC even on DC machines, due to the commutator action (which periodically reverses current direction) or due
The characteristics mainly lie in the two aspects for manufacturing of the gear motor. One is the mechanical process, and the other is a special process. With the continuous development of new structure and production technology, many techniques from the
A micro DC reduction motor is a kind of gear reduction motor referring to reduction transmission equipment, also known as DC reduction gearbox. It is widely used in intelligent robots, intelligent medical equipment, automatic industrial equipment, smart electronics, and home
There are different types of DC motors with different speeds, torques, and applications. Generally, DC motors can be divided into brushed and brushless DC motors. Both types are used in commercial and household applications. What is the difference between these
A “varistor” is a resistance device with non-linear volt-ampere characteristics. It is mainly used for voltage clamping when the circuit is subjected to overvoltage and absorbs excess current to protect sensitive devices. The varistor is a voltage-limiting protection device. Using
A varistor is an electronic component with an electrical resistance that varies with the applied voltage. Also known as a voltage-dependent resistor (VDR), it has a nonlinear, non-ohmic current-voltage characteristic that is similar to that of a diode. In contrast to a diode, however, it has the same character for both directions of
Many industries depend on DC Motors. In the decades before the DC Motor refined, their use was limited. Today many different applications are heavily dependent on these motors within a multitude of industries. Because its quality has a direct impact
A gear motor is an all-in-one combination of an electric motor and a gearbox. That makes it a simple, cost-effective solution for high-torque, low-speed applications because it combines an electric motor with a gear reducer system. Most importantly, gear motors
DC motor DC motors are powered from direct current (DC) power and are mechanically commutated machines. DC motors have a voltage induced rotating armature winding, and a non-rotating armature field frame winding that is a static field or permanent magnet.
Gear motors are used in applications that require high output torque and lower output shaft rotational speed, especially where space and available power are limited. That describes a wide range of equipment applications across multiple industries. From automotive wiper and
When traditional machining methods reach their limit, electric discharge machining can be the answer. The EDM process allows for high accuracy and is applicable for any conductive material. Brief introduction of EDM Electrical discharge machining, or EDM, is a non-traditional
In 2021, the first day of the Chinese New Year will be on Friday, 12 February. The Chinese New Year is associated with several myths
Shenzhen Kinmore Motor Co., Ltd. held the 2020 year-end summary meeting and the 2021 Spring Festival Gala from January 29, 2021. The whole team enjoys