Basic Information
Basic parameters :
- Diameter: ∅ 20.4 mm
- Motor Type : Low Voltage DC Motor
Key Features :
1. Plastic End Cap;
2. Oil-impregnated Bearing;
3. Precious Metal Brush/Carbon Brush;
4. Carbon Steel/Stainless Steel Shaft
Remarks :
1. All values approximate;
2. Customized electric performance on request by using suitable windings;
3. Available with required cables and accessories after evaluation
Applications :
Product Description
> Dimensions Drawing
> Technical Datasheet
Model | Voltage | No Load | At Maximum Efficiency | Stall | |||||||||
Operating Range | Nominal | Speed | Current | Speed | Current | Torque | Output | Torque | Current | ||||
V | V | r/min | A | r/min | A | mNm | g·cm | W | mNm | g·cm | A | ||
FC-140PA | 11260 | 6.0-9.0 | 9 | 8100 | 0.07 | 6310 | 0.25 | 1.76 | 18 | 1.17 | 8.0 | 81.6 | 0.87 |
FC-140PA | 17132 | 6.0-12.0 | 12 | 21500 | 0.21 | 17681 | 0.97 | 3.8 | 38.7 | 7.1 | 21.6 | 220 | 4.5 |
FC-140SA | 10350 | 6.0-12.0 | 12 | 8200 | 0.045 | 6475 | 0.17 | 1.7 | 17.3 | 1.7 | 7.8 | 79.6 | 0.63 |
Find Out More
> Related Products

FF-030PK
15.5

RS-545SHVC2-7504F
35.8

RS-365PHV-2554
27.7

RS-9912H
51.8

RS-557SH
35.8

RS-545SHFJ2-5520F
35.8
> FAQs
1. Would you mind sending the quotation for this motor?
2. What's the lead time for samples or mass production?
Normally, it takes 15-25 days to produce samples; about mass production, it will take 35-40 days for DC motor production and 45-60 days for gear motor production.
3. Is there an exact lifetime for the motor?
I am afraid not. The lifetime varies a lot for different Models, materials, and Operating conditions like temp., humidity, duty cycle, input power, and how the motor or gear motor is coupled to the load, etc. And the lifetime we normally mentioned is the time when the motor rotates without any stop and the Current, Speed, and Torque change is within +/-30% of the initial value. If you can specify the detailed requirements and working conditions, we’ll make our evaluation to see which one will be suitable to meet your needs.
4. What kind of parameter information should be provided to get a DC motor evaluated?
we know, different shapes determine the size of the space, which means that different sizes can achieve performance such as different Torque values. Performance requirement includes working Voltage, rated load, and rated Speed, while the shape requirement includes the maximum size of the inStallation, out shaft size, and the direction of the terminal.
If the customer has other more detailed requirements, such as Current limit, working environment, service life requirements, EMC requirements, etc., we can also provide a more detailed and accurate evaluation together.
> Areas of Expertise
Basic Information




Basic Information
- Diameter: ∅ 20.4 mm
- Type : Low Voltage DC Motor
Key Features
1. Plastic End Cap;
2. Oil-impregnated Bearing;
3. Precious Metal Brush/Carbon Brush;
4. Carbon Steel/Stainless Steel Shaft
Remarks
1. All values approximate;
2. Customized electric performance on request by using suitable windings;
3. Available with required cables and accessories after evaluation
Applications
Product Description
>> Dimensions Drawing
>> Datasheet (*Scroll right to view the entire sheet)
Model | Voltage | No Load | At Maximum Efficiency | Stall | |||||||||
Operating Range | Nominal | Speed | Current | Speed | Current | Torque | Output | Torque | Current | ||||
V | V | r/min | A | r/min | A | mNm | g·cm | W | mNm | g·cm | A | ||
FC-140PA | 11260 | 6.0-9.0 | 9 | 8100 | 0.07 | 6310 | 0.25 | 1.76 | 18 | 1.17 | 8.0 | 81.6 | 0.87 |
FC-140PA | 17132 | 6.0-12.0 | 12 | 21500 | 0.21 | 17681 | 0.97 | 3.8 | 38.7 | 7.1 | 21.6 | 220 | 4.5 |
FC-140SA | 10350 | 6.0-12.0 | 12 | 8200 | 0.045 | 6475 | 0.17 | 1.7 | 17.3 | 1.7 | 7.8 | 79.6 | 0.63 |